6' snap-lock metal, crush resistant, flexible dryer venting. One end with Sanp-lock male fitting and other end with Snap-lock female fitting for standard 4" openings. Best choice for fast installation with collars and for creating longer runs with other vent pipes.
This White Compact Dryer Stand is designed to allow the ability stack Whirlpool compact dryers over compact washers creating a great space saving solution. The stand is made of durable and sturdy metal.
-Ideal for cleaning dryers with a top-mounted lint screen
-Removes lint to extend the life of your dryer
-Regular brush usage will also lower utility bills, conserve energy and reduce drying times
To ensure optimum dryer performance, it is recommend to regularly and thoroughly remove excess lint from the lint filter crevice. Using the dryer lint cleaning brush regularly can extend dryer life, lower utility bills, conserve energy, and reduce drying times.
Everything you need for do-it-yourself dryer repair and maintenance. This kit will fit most Whirlpool, Maytag (dryers built after 2007), and KitchenAid dryers with a top-mounted lint screen. Kit includes (2) support wheels, (1) idler pulley, (1) drive belt and related components with installation instructions.
The great thing about this item is that its venting system allows the wall vent to protrude up to 2-1/2" without having to be trimmed. The kit includes an extension collar that allows it to have a universal 4-1/2" clearance. This installer kit does a wonderful job of utilizing loop systems and DuraSafe™ patented snap-lock fittings. Packaging includes 4-foot vent section that attaches to a close elbow, one 4-foot vent section that attaches to a wall offset, and an extension collar. Total length of this item is eight feet. Keep in mind that additional vents can be snapped between sections for longer runs.
Everything you need for do-it-yourself dryer repair and maintenance. This kit will fit most Whirlpool, Maytag (dryers built after 2007), and KitchenAid dryers with a door-mounted lint screen. Kit includes (4) support wheels, (1) idler pulley, (1) drive belt and related components with installation instructions.
This item is designed to fit between the studs inside the wall. It does a great job of carrying the exhaust air through the top plate and into attic/floor space. You should use the 4" aluminum vent to complete the run to the outside. This dryer vent rough-in system has (3) 2-1/2" clearance telescoping sections that extend from 29" to 77". It also has one male snap-lock fitting, one female snap-lock collar and mounting strap, as well as all-metal rigid construction that meets most in-wall codes.
18"-29" metal vent periscope for tight 2 1/2" clearance. One male Snap-Lock fitting and one extra long draw-band collar. Beveled ends eliminate interference with floors and side walls. Includes 2 clamps.
This electric dryer hook-up kit fits most major brands. The kit contains everything you need for easy installation, including: (1) 8' long, 4" diameter vent connector, (2) 4" vent clamps, and (1) 4' 4-wire power cord.
This Universal, midnight gray, 4 way vent kit is for use with all the new custom colors of dryers in the Performance series. It is to be used when venting is in positions other than the back of the dryer. This kit is for dryers with the lint screen in the front.
-Five foot long duct with one male snap-lock fitting, one soft-cuff end male fitting acts as a vent coupling
-Use a clamp (not included) to connect soft end to DuraSafe™ venting components
This item is a five foot long duct with one male snap-lock fitting and one soft-cuff end male fitting that acts as a vent coupling. You can purchase a clamp to connect the soft end to DuraSafe™ venting components.
By purchasing this kit today, you can trust safer metal venting to increase air flow and shorten the time it takes to dry your clothes. You can do every kind of installing, whether it's new or an upgrade for existing venting. Packaging includes 2 DuraSafe™ 4-foot long metal vent sections with patented snap-lock fittings attached to a close elbow. This item works great when you are trying to install in a minimum of 4-1/2" and the wall vent trimmed flush while the wall plate is used.
-Use when venting in positions other than the back
This Midnight Gray 4-Way Advantage Dryer Vent Kit allows you to change the direction in which your dryer will vent. The kit is designed to be used when you need your venting in positions other than the back of the dryer.
Limited on space? Need your dryer in closer proximity to the wall? This DuraSafe™ Close Elbow effectively turns 90 degrees within 4-1/2" allowing you to gain extra space without dealing with kinking or crushing of flexed ducting.
Have items you need to dry without tumbling? With this Dryer Rack easily dries your sneakers, sweaters, undergarments, stuffed animals and more by simply placing the rack in your dryer to enjoy tumble-free drying! This rack is specifically designed for Super Capacity Plus 7.0 cu. ft. dryers.
Cramped for space? This 29"-50" metal vent periscope adjusts allowing you to place your dryer within 2 1/2" of your wall. The periscope has one male Snap-Lock fitting and one extra long draw-band collar. It features beveled ends, eliminating interference with floors and side walls.
Adjustable clothes rack allows you to conveniently hang garments straight from the washer or dryer. It is collapsible and removable for quick, easy storage. It assembles easily in less than 5 minutes with a Phillips screwdriver. The rotating arms pivot independently to accommodate various configurations. It also easily attaches with scratch-resistant magnets to most full-size washers or dryers.
Tray fits under washing machine and prevents floor damage. Protects floor from scuffs, spills and overflows including laundry detergents and bleach. Includes a 1 in. PVC drain fitting, washer and lock nut, and installation instructions. Fits under Duet® , Duet Sport®, Epic®, and all top-load platforms. 29 1/4" x 31 1/4" outside dimensions. 27" x 29" is the usable size. The unit curves up after those dimensions.
Use the dryer rack to dry items that shouldn't be tumbled, such as sweaters, ball caps, footwear, delicates, stuffed animals, and more. Simply place the rack inside the dryer, and enjoy gentle tumble-free drying. This rack is specifically designed for Whirlpool® Super Capacity 6.5 cu. ft. dryers.